The soldering work of the automatic soldering machine is mainly completed by the soldering iron head, then its importance is self-evident, but the number of problems is often seen, often unresolved, which is inexplicable. Need to pay attention to the following points to maintain a good work efficiency, we have summarized the following methods for everyone:

  

■ Welding temperature of automatic soldering machine and precautions when suspended

    The temperature of the automatic soldering machine should be as low as 400 ℃ as much as possible. When the machine stops welding in the middle, the power of the machine and the thermostat should be turned off and tin should be added to the soldering iron head to avoid empty burning of the machine, and the soldering iron head should always have tin.

■ The soldering iron head of automatic soldering machine should be cleaned frequently

    If the tin-plated part of the soldering iron tip contains black oxide, a new tin layer can be plated, and then wipe the soldering iron tip with a damp clean sponge. Repeat this cleaning until the oxide is completely removed, and then apply a new tin layer. And regularly clean the tip of the soldering iron.

■ Selection and soldering of soldering iron head of automatic soldering machine

    When the automatic soldering machine is soldering, do not force the soldering iron tip to pick or squeeze the soldered object. To clean the soldering iron tip, use the original or professional manufacturer's cleaning sponge, add some water, squeeze it by hand after adding water, keep the sponge wet That's it.

■ The surface of the soldering iron head of the automatic soldering machine is kept clean

    Do not remove excess solder on the soldering iron tip before closing the soldering station. These excess tin will protect the surface of the tin and prevent its oxidation while the soldering iron tip is still hot. Do not add any compound to the tinned surface.

■ Automatic soldering machine soldering iron head for other purposes

    Because of electroplating, the iron tip should never be filed or ground, and the chrome tip should not be wiped with rough objects. It is recommended to apply fresh solder to the tip of the soldering iron during the first heating in order to remove the oxide coated on it.

■ Automatic soldering machine should replace the soldering iron tip in time

    With the longer the automatic soldering machine is used, the soldering iron head will also undergo small-scale deformation and heavy corrosion. At this time, the soldering iron head must be replaced in time, otherwise a large number of non-scale products will appear

The above is the method of reducing the number of times of the soldering iron tip of the automatic soldering machine and the technique of increasing its life. We hope it can help you!